Panasonic EBL512 G3 5000 Information

Also see for EBL512 G3 5000: Planning guide User manual Planning Instructions Operating instructions

Contents

Panasonic Electric Works Nordic ABJungmansgatan 12, SE-211 19 Malmö, SwedenTel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99info-fste@eu.pewg.panasonic.com • www.panasonic-fire-security.comFire alarm systemEBL512 G35000 and 5001 EBL512 G3 -- the third generation of the intelligent analog addressable system EBL512. Up to 1020 addresses - 512 alarm points - per control and indicating equipment (c.i.e.) Redundant network for up to 30 control units with two TLON networksAnalog addressable systemEBL512 G3 is an intelligent, analog andaddressable Control and Indicating Equip-ment for fire detection and fire alarm systemsfor buildings, which conforms to the EN54-2and –4 standards. The front and a largedisplay make it very user-friendly. Comeswithout or with a built-in printer.Features / functionsThe EBL512 G3 system meets the moststringent requirements relating to firedetection and alarm. The PC softwareWinG3 is used to create, edit, download,upload (backup) the site specific data (SSD),maintenance, new SW downloads, etc.Some features / functions: Adaptation of each analog detector'salarm level in relation to its contamina-tion. Service signal when required. Alarm algorithms with filtering toreduce nuisance alarms. Algorithm forfaster detection of smouldering fires. Functions, customer related: Test mode,Alert Annunciation, disablements, etc. Functions: Fire door closing, inter-locking combinations of outputs &inputs, time channels, alarm delay, two-unit dependence, user definable alarmtext for each alarm point, etc. Programmable inputs and outputs anda large number of trigger conditions. Expansion boards (options) up to sixboards with conv. zone line inputsand/or relay outputs. Interface for ext. Fire Brigade Panels,Alert Annunciation Units, etc. Web-server 1598 (option) can connectthe system to Internet / an Intranet(LAN) for status presentation andremote control via a PC (web browser).Up to 1020 addressesEBL512 G3 has a capacity of 1020addresses, of which 128, 256 or 512 areaddresses for alarm points. Can be upgradedon site, i.e. 128  256  512 alarm points.Each c.i.e. has four COM loops forconnection of up to 255 units per loop.Some loop units that can be connected: Analog detectors (sensors) Addressable manual call points Addressable short circuit isolator Addressable input and output units Addressable siren, sounder base &beacon Addressable external power supply unitTLON NetworkUp to 30 EBL512 G3 control units can beconnected in a TLON network. One TLONconnection board 1590 is required in eachc.i.e. Two 1590 for a redundant network.MiscellaneousEBL512 G3 has space in the grey metalcabinet for two 28Ah Sealed Lead-Acidbatteries.In each c.i.e. can be mounted up to sixexpansion boards 4580-4583.

/ 2

Related manuals for Panasonic EBL512 G3 5000