34RQT9428Advanced timer recordingManually programming timerrecordingsHDD BD-RE BD-R RAM1 Press [PROG/CHECK].Channel Name Schedule Drive/Mode SpaceNew Timer ProgrammeOKRETURNPage UPPage Down CHTimer OffTotal 0/32History ListTimer Recording 30:30 DRHDDRemain FRI 23.01.2009 8:59DEL Delete2 Press [e, r] to select “New TimerProgramme” and press [OK].3 Press [w, q] to select the items andchange the items with [e, r].Timer Recording Remain HDD 30:30 DR FRI 23.01.2009 8:59All DVB Channels 1 dayProgramme NameChannel21 FRI 23.01 13:10 13:50 HDD DRDate/Week Start Stop Drive Mode[Prog.Name] ABC Asia Pacific NewsRETURNOKFavourites/AV 1 day/WeeklyFRI, 23 January 2009ABC Asia Pacific NewsABC 213:00 - 13:59, 59 min.Genre: NewsRating: GPage Down CHy ChannelSelect the channel to record“AV1” or “AV2” can be selected when “AV input” is selectedin “Favourites”. You can select “All DVB Channels”,“Favourites 1”, “Favourites 2”, “Favourites 3”, “Favourites 4”or “AV input” by pressing the “Red” button only when“Channel” is selected.y Date/WeekYou can select current date up to one month later minusone day. You can select “1day” or “Weekly” by pressing the“Green” button only when “Date/Week” is selected.Titles recorded using the same daily or weekly timer arebundled and displayed as a “group” in the Direct Navigatorscreen (➡ 40) except when using Auto Renewal Recording.y Start/StopPress and hold [e, r] to alter the Start (Start time) andStop (Finish time) in 15-minute increments.y DriveOnly 1 programme can be set to timer record on the disc.When the recording drive is “BD” and there is not enoughremaining space, recording automatically switches to “HDD”(➡ 35, Relief Recording).y ModeRecording modes (➡ 30)y Renew (Auto Renewal Recording) (➡ 35)y Programme NamePress [OK]. (➡ 76, Entering text)4 Press [OK].The timer programme is stored and the timer icon isdisplayed.zTimer icon“z” lights on the unit’s display to indicate timer recordingstandby has been activated.od SpaceOK Check for available spaceon HDD, etc., when “!” isdisplayed.To return to the previous screenPress [RETURN ].To exit the screenPress [EXIT].
