33RQT9428RecordingOperation during RecordingCheck the recordingprogramme Press [STATUS ].e.g., while 2 programmes simultaneous recording090 NINE HDHDDREC1002 ABC TV REC2Recording programmedisplayed on the TV screenRecording programme notdisplayed on the TV screenDisplay the recordingprogramme on the TVscreenIt is necessary to display the recording programme onto the TV screen to perform operations such aspause.y If the input was switched: Press [INPUT SELECT].y If the channel was switched: Press [1 2 CH].y If the drive was switched: Press [DRIVE SELECT].To stop recording It is necessary to display the programme you want to stop on the TV screen. (➡ above)Press [g].y From the start to the end of the recording is called one title.To pause recording It is necessary to display the programme you want to pause on the TV screen. (➡ above)Press [h].y Press again to restart recording.You can also press [* REC] to restart.(Title is not split into separate titles.)y If paused while recording in DR mode, the paused part may become a still picture for a moment duringplayback of that programme.Switch the input Press [INPUT SELECT].Switch to other channel Press [1 2 CH].Perform 2 programmessimultaneous recordingRecord other programme with steps 1–5 on page 23.y One of the 2 programmes needs to be digital broadcasting recorded with DR mode.REC1REC2“REC1” and “REC2” will lighty Channel switch / input switch while performing 2 programme simultaneous recording will switchbetween the 2 recording programmes.
