Panasonic AV-HS300G Operating Instructions Manual

Contents

Panasonic AV-HS300G Operating Instructions Manual Manual pdf 47 page image

475. Image transmission functionsThis unit comes with a function for transmitting still images from the host computer to the unit via Ethernet anda function for importing still images from the unit into the host computer. The image transmission program mustbe installed in the host computer from the CD-ROM supplied in order to use these functions. For details oninstallation, refer to “How to install the program”.SpecificationsRun the image transmission program (HS300 Tool) in a host computer which satisfies the following conditions.• Operating system: Windows 000 or Windows XP• Processor: Pentium III, 1 GHz or better recommended• RAM: 56 MB or more recommended• Hard disk drive: At least 50 MB of free memory• Ethernet: 10BASE-T or 100BASE-TX• Display: TrueColor (4 bit, 3 bit color), 800  600 dots or moreThe image formats supported include bitmap (bmp), JPEG (jpg), TIFF (tif), GIF (gif) and PNG (png).The image transmission program is equipped with a function for automatically converting images into the specifiedvideo format size.ConnectionsConnect this unit to Ethernet using a twisted pair cable. Use a LAN crossover cable to connect the unit with thehost computer directly. Use a LAN straight cable to connect to Ethernet using a hub or other equipment.For details on network setup such as IP addresses, refer to [3-7 Network settings].Transmitting images uses network capacity which may result in other connected devices possibly being affectedwhen connecting to Ethernet through a hub and other equipment.LAN crossover cableLAN straight cableHUBLAN straight cable