Panasonic AV-HS300G Operating Instructions Manual

Contents

Panasonic AV-HS300G Operating Instructions Manual Manual pdf 29 page image

93. Setup3-1-3. Setting the DVI input signals (IN6)Selecting the signal systemSelect the digital or analog system for the DVI input video signals.DIG (digital): Digital input signals of the DVI connector are effective.ANLG (analog): Analog input signals of the DVI connector are effective.1 Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUPmenu.2 Turn [F1] to display the DVIIN menu.3 Turn [F], and select the signal system using the MODE item.'6--"/-(%7**/ .0%&%*( 4$"-/03.Selecting the scaling methodXGA or SXGA can be input as the size. The frequency is fixed at 60 Hz.NORM (normal): The size of the input images is increased or reduced while keeping their aspect ratio thesame.FULL (full): The size of the input images is increased or reduced in accordance with the systemresolution. (The aspect ratio of the input images is not kept the same. The rate at which theimage size is increased or reduced in the vertical direction and in the horizontal directiondiffers.)On the DVIIN menu, turn [F3], and select the scaling method using the SCAL item.DVI format Mode HD/1080i HD/720P SD/NTSC*1 SD/PAL*21920  1080 1280  720 720  480 720  576XGA1024  768NORM FULL SXGA1280  1024NORM FULL *1: 480/59.94i, *2: 576/50i