Panasonic AV-HS300G Operating Instructions Manual

Contents

Panasonic AV-HS300G Operating Instructions Manual Manual pdf 26 page image

62. Basic operations2-7. Preset memoryUp to 10 panel settings can be stored in this memory.The table below lists the settings which are stored.Item Description of setting Initial value (factory default)Crosspoint A bus 1B bus 1KEY-S 1KEY-F 1AUX bus 1Color background WHITEWipe Wipe pattern 4 (center)Border width 0Soft effect width 0Border color WHTTransition area BKGD/KEY selection BKGDMIX/WIPE selection MIXAuto transition time (BKGD) 30FAuto transition time (KEY) 30FKey Key type (TYPE) LINKey adjustment (ADJ) GAIN: 100CLIP: 0DENS: 100Invert ON/OFF OFFFill color BLEEdge color YLWEdge ON/OFF (TYPE) OFFEdge width User color User color 1 (HUE, SAT, LUM) 0, 0, 100User color (HUE, SAT, LUM) 355, 100, 7User color 3 (HUE, SAT, LUM) 50, 100, 9User color 4 (HUE, SAT, LUM) 0, 0, 0 The data stored in the preset memory will not be initialized even when initializing is performed.STORE: This is used to store the panel settings in the preset memory.1 Press the [FUNC] switch to light its indicator, and then press the [MEM] switch to display the MEM menu.The PSMEM (1/3) menu appears first.2 Turn [F], select “STOR” using the MODE item, turn [F3], and set the preset memory number using the NO.item.3 Press the [F4] switch (EXEC) to store the settings.3&$-$-314.&. .0%&4503 /0 &9&$An asterisk ( ) appears at the left of the number when data has been saved in the preset memory.