Panasonic AV-HS300G Operating Instructions Manual

Contents

Panasonic AV-HS300G Operating Instructions Manual Manual pdf 13 page image

131. Functions in each area1-6. Rear panel connections area             SDI signal input connectors [DIGITAL INPUTS 1 to 5]IN: SDI signal input; OUT: active through output DVI-I signal input connector [DIGITAL INPUTS 6 DVI-I] Analog HD component input connectors [ANALOG INPUTS 1 to 5] (optional) PGM output connectors [DIGITAL OUTPUTS PGM 1, 2] (SDI) PVW output connector [DIGITAL OUTPUTS PVW 1] (SDI) AUX output connectors [DIGITAL OUTPUTS AUX 1, 2] (SDI) PGM output connector [ANALOG OUTPUTS PGM 1] (analog HD component) PVW output connector [ANALOG OUTPUTS PVW 1] (analog HD component) AUX output connector [ANALOG OUTPUTS AUX 1] (analog HD component) Ethernet port [ETHERNET] (10BASE-T, 100BASE-TX) GPI input connector [GPI] (auto take) For details on connection, refer to “6. External interfaces”. DC power socket [12V IN]The DC 1 V voltage is supplied to this socket.Use the AW-PS505A AC adaptor.NoteWhen using other power sources, make sure the outputis DC 1 V  V, 5 A. Reference input connector/BB output connector [REF]Loop-through output in the external sync mode.BB signals output from both connectors in the internal sync mode. RS-422 interface connector [RS-422] For details on connection, refer to “6. External interfaces”. Tally output connector [TALLY] For details on connection, refer to “6. External interfaces”. Ground connectorConnect to the system’s earth ground.Pin No. Signal name1 GND NC3 NC4 DC1V 