Panasonic AV-HS300G Operating Instructions Manual

Contents

Panasonic AV-HS300G Operating Instructions Manual Manual pdf 33 page image

333. Setup3-4. Setting the crosspoints3-4-1. Assigning signals to the crosspointsExternal video input signals and internally generated signals can be assigned to crosspoint switches 1 to 7.Displaying the assignment statuses1 Press the [FUNC] switch to light its indicator, and then press the [XPT] switch to display the XPT menu.2 The XPTAS (1/3) menu appears first, and the assignment statuses are displayed. The names of theassigned signals are abbreviated on the display.915"4 4*(915 #%When one of the crosspoint switches 1 to 7 is held down for a long time, the name of the signal assigned isdisplayed on the LCD while the button is held down.Example: When crosspoint switch 1 is pressed (when the black signal has been assigned to this switch).915"4 4*(915 #-,Assigning signals to the crosspoints1 Press the [FUNC] switch to light its indicator, and then press the [XPT] switch to display the XPT menu.2 Turn [F1] to display the XPTAS (/3) menu.3 Turn [F], select the crosspoint switch using the XPT item, turn [F3] and select the input signal using the SIGitem.*/*/*/*/%7*#-,$#(%$#"3'.&.915"4 915 4*(*/The table below lists the materials which can be assigned.Switch Signal Abbreviation DescriptionXP1 to 7 INPUT1 to 5 IN1 to 5 1 to 5 SDI or analog HD componentDVIIN DVI D DVI-I inputBLACK BLK B Internally generated signal, blackCOLORBACKGROUNDCBGD G Internally generated signal, colorbackground (matte)COLOR BAR CBAR C Internally generated signal, color barFRAME MEMORY FMEM F Frame memory image