Panasonic AV-HS300G Operating Instructions Manual

Contents

Panasonic AV-HS300G Operating Instructions Manual Manual pdf 38 page image

383. Setup3-7. Network settingsSet up the network for transmitting image files by Ethernet. For details on image transmission method, refer to“5. Image transmission functions”.The network initial setup is: IP address: 19.168.0.10, subnet mask: 55.55.55.0 and gateway: 0.0.0.0 (unused).When using the host computer with settings matching the network setup, it is not necessary to setup via themenu.For the setting to take effect, the system must be rebooted. Turn the system’s power off and then back on.Setting the IP address1 Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUPmenu.2 Turn [F1] to display the IP menu.3 Turn [F] to select the setting location. An asterisk ( ) appears at the setting location.4 Turn [F3] to set the number, and press the [F3] switch to enter the setting. If the setting is not entered eventhough it has been changed, “ ! ” appears above the setting location, and when the setting location is movedby turning [F], the value prior to the change is restored.*1 Setting the subnet mask1 On the SETUP menu, turn [F1] to display the MASK menu.2 Turn [F] to select the setting location. An asterisk ( ) appears at the setting location.3 Turn [F3] to set the number, and press the [F3] switch to enter the setting. If the setting is not entered eventhough it has been changed, “ ! ” appears above the setting location, and when the setting location is movedby turning [F], the value prior to the change is restored.."4,