Panasonic AV-HS300 Operating Instructions Manual

Panasonic AV-HS300 Operating Instructions Manual Manual pdf 8 page image

81. Parts and their functions1-3. Wipe area Wipe pattern selector switches [WIPE PATTERN / FUNC]These are used to select the wipe patterns. Each switch is used to select oneof the nine wipe patterns.The indicator of the switch for the selected pattern lights (in amber).When the [FUNC] switch () has been pressed and its indicator is lighted, thefunction setting menu is selected, and the indicator lights up green. Wipe direction selector switch [N N/R R]This is used to select the wipe direction.  See 2-2-2[N]: For setting the wipe direction to the normal direction.[N/R]: To switch the wipe direction between normal and reverse when the execution of the transition hasbeen completed.[R]: For setting the wipe direction to the reverse direction. [FUNC] switchWhen this switch is pressed, its indicator lights up green. If a wipe pattern selector switch is pressed whileits indicator is lighted, the wipe pattern selector switch lights up green, and the setting menu of the functionindicated underneath the switch appears on the LCD display.[TIME]: For setting the auto transition time.  See 2-1-5[WIPE]: For setting the wipe border and soft effect.  See 2-2-3[CBGD]: For setting the color background.  See 2-4[KEY]: For setting the key.  See 2-3[EDGE]: For setting the key edge.  See 2-3-5[FRZ]: For displaying the freeze status display and setting freezing.  See 2-5[MEM]: For setting the preset memory or frame memory.  See 2-6, 2-7[XPT]: For displaying and setting the crosspoint assignment.  See 3-4[SETUP]: For performing the system settings.  See 3 Freeze status indicator LEDWhen this LED is lighted, it means that one of the input signals is frozen.When the [FUNC] switch () is pressed and its indicator is lighted and then the [FRZ] switch is pressed, thefreeze status is indicated for each input. (An asterisk ( ) appears above the name of a frozen crosspoint.)Bear in mind that since the signals are frozen while the indicator is lighted, the unit’s output will remainunchanged even if the input images change.(When crosspoints 3 and 5 are frozen)ＦＲＺ１／２ＦＲＺ：＊＊ＸＰＴ：１２３４５６７