Panasonic AV-HS300 Operating Instructions Manual

Panasonic AV-HS300 Operating Instructions Manual Manual pdf 45 page image

455. Image transmission functionsThis unit comes with a function for transmitting still images from the host computer to the unit via Ethernet anda function for importing still images from the unit into the host computer. The image transmission program mustbe installed in the host computer from the CD-ROM supplied in order to use these functions. For details oninstallation, refer to “How to install the program”.SpecificationsRun the image transmission program (HS300 Tool) in a host computer which satisfies the following conditions.• Operating system: Windows2000 or WindowsXP• Processor: Pentium III, 1 GHz or better recommended• RAM: 256 MB or more recommended• Hard disk drive: At least 50 MB of free memory• Ethernet: 10BASE-T or 100BASE-TX• Display: TrueColor (24 bit, 32 bit color), 800600 dots or moreThe image formats supported include bitmap (bmp), JPEG (jpg or jpeg), TIFF (tif) and GIF (gif).The image transmission program is equipped with a function for automatically converting images into the specifiedvideo format size.ConnectionsConnect this unit to Ethernet using a twisted pair cable. Use a LAN crossover cable to connect the unit with thehost computer directly. Use a LAN straight cable to connect to Ethernet using a hub or other equipment.For details on network setup such as IP addresses, refer to [3-7 Network settings].Transmitting images uses network capacity which may result in other connected devices possibly being affectedwhen connecting to Ethernet through a hub and other equipment.LAN crossover cableLAN straight cableHUBLAN straight cable