Panasonic AV-HS300 Operating Instructions Manual

Panasonic AV-HS300 Operating Instructions Manual Manual pdf 31 page image

313. Setup3-4. Setting the crosspoints3-4-1. Assigning signals to the crosspointsExternal video input signals and internally generated signals can be assigned to crosspoint switches 1 to 7.Displaying the assignment statuses Press the [FUNC] switch to light its indicator, and then press the [XPT] switch to display the XPT menu. The XPTAS (1/3) menu appears first, and the assignment statuses are displayed. The names of theassigned signals are abbreviated on the display.ＸＰＴＡＳ１／３ＳＩＧ：Ｂ１２３４５ＤＸＰＴ：１２３４５６７When one of the crosspoint switches 1 to 7 is held down for a long time, the name of the signal assigned isdisplayed on the LCD while the button is held down.Example: When crosspoint switch 1 is pressed (when the black signal has been assigned to this switch).ＸＰＴＡＳＳＩＧ：ＢＬＫＸＰＴ：１Assigning signals to the crosspoints Press the [FUNC] switch to light its indicator, and then press the [XPT] switch to display the XPT menu. Turn [F1] to display the XPTAS (2/3) menu. Turn [F2], select the crosspoint switch using the XPT item, turn [F2] and select the input signal using the SIGitem.ＸＰＴＡＳ２／３ＸＰＴ１ＳＩＧＩＮ１２３４５６７ＩＮ２ＩＮ３ＩＮ４ＩＮ５ＤＶＩＢＬＫＣＢＧＤＣＢＡＲＦＭＥＭThe table below lists the materials which can be assigned.Switch Signal Abbreviation DescriptionXP1 to 7 INPUT1 to 5 IN1 to 5 1 to 5 SDI or analog HD componentDVIIN DVI D DVI-I inputBLACK BLK B Internally generated signal, blackCOLORBACKGROUNDCBGD G Internally generated signal, colorbackground (matte)COLOR BAR CBAR C Internally generated signal, color barFRAME MEMORY FMEM F Frame memory image