Panasonic AV-HS300 Operating Instructions Manual

Panasonic AV-HS300 Operating Instructions Manual Manual pdf 38 page image

383. Setup3-8. Other settings3-8-1. LCD backlightThe LCD backlight can be set to ON or OFF. Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUPmenu. Turn [F1] to display the SYS menu.Turn [F2], and select ON or OFF for the backlight using the BL item.ＳＹＳ１２／１４ＢＬＯＮＶＡＮＣＯＦＦＢＢ７．５０ＯＮＯＦＦ3-8-2. Setting the ancillary dataWhether the ancillary data which is superimposed on the vertical blanking period of the input images is to bepassed through can be selected. The data will not pass through during a transition. Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUPmenu. Turn [F1] to display the SYS menu.Turn [F3], and select ON or OFF for the ancillary data using the VANS item.ON: The ancillary data is passed through.OFF: The ancillary data is not passed through.ＳＹＳ１２／１４ＢＬＯＮＶＡＮＣＯＦＦＢＢ７．５０ＯＮＯＦＦ3-8-3. BB signal setup levelThe setup level of the BB signal in the internal sync mode can be selected. The level selected takes effect with the59.94i or 59.94p format. It is fixed at 0 IRE with the 50i or 50p format. Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUPmenu. Turn [F1] to display the SYS menu.Turn [F2], and select the setup level using the BB item.0: 0 IRE7.5: 7.5 IREＳＹＳ１２／１４ＢＬＯＮＶＡＮＣＯＦＦＢＢ７．５０ＯＮＯＦＦ