192. Basic operationsAdjusting the fill colorThe fill color can be adjusted when USR1 to 4 have been selected. Use of USR1 to 4 is shared by the bordercolor, background color and edge color. Press the [FUNC] switch to light its indicator, and then press the [KEY] switch to display the KEY menu. Turn [F1] to display the USR1 to 4 (user color) menu. Turn [F2], [F3] and [F4] to adjust the color (HUE, SAT and LUM).USR14/7HUE100SAT100LUM1000-1080-1000-3592-3-5. Key decorationsSetting the key edgeA border, shadow or other edge can be added to the key. Press the [FUNC] switch to light its indicator, and then press the [EDGE] switch to display the EDGE menu.The EDGE setting screen appears first.EDGE1/5TYPEBODRWIDT4COLRWHTYLWCYNGRNMGTREDBLEBLKUSR1USR2USR3USR4DROPSHDWOUTLOFF0-8 Turn [F2] to select the edge type.OFF: An edge is not added.BODR (BORDER): A border is added around the entire edge.DROP: A diagonal border is added but only in the direction toward the bottom right of the key.SHDW (SHADOW): A shadow is added but only in the direction toward the bottom right of the key.OUTL (OUTLINE): An outline (only a border with no fill) is added. Turn [F3] to set the edge width. Turn [F4] to select the edge color.�����������������������