Panasonic AV-HS300 Operating Instructions Manual

Panasonic AV-HS300 Operating Instructions Manual Manual pdf 24 page image

242. Basic operations2-7. Preset memoryUp to 10 panel settings can be stored in this memory (flash memory).The table below lists the settings which are stored.Item Description of setting Initial value (factory default)Crosspoint A bus 1B bus 2KEY-S 4KEY-F 5AUX bus 1Color background WHITEWipe Wipe pattern 4 (center)Border width 4 (TBD)Soft effect width 4 (TBD)Border color YLWTransition area BKGD/KEY selection BKGDMIX/WIPE selection MIXAuto transition time (BKGD) 60FAuto transition time (KEY) 60FKey Key type (TYPE) LINKey adjustment (ADJ) GAIN: 100 (TBD)CLIP: 50 (TBD)DENS: 100 (TBD)Inversion ON/OFF OFFFill color GRN (TBD)Edge color YLW (TBD)Edge ON/OFF (TYPE) OFFEdge width 4 (TBD)User color User color 1 (HUE, SAT, LUM) 0, 0, 100 (TBD)User color 2 (HUE, SAT, LUM) 355, 100, 7 (TBD)User color 3 (HUE, SAT, LUM) 50, 100, 29 (TBD)User color 4 (HUE, SAT, LUM) 0, 0, 0 (TBD)STORE: This is used to store the panel settings in the preset memory. Press the [FUNC] switch to light its indicator, and then press the [MEM] switch to display the MEM menu.The PSMEM (1/3) menu appears first. Turn [F2], select “STOR” using the MODE item, turn [F3], and set the preset memory number using the NO.item. Press the [F4] switch (EXEC) to store the settings.ＰＳＭＥＭ１／３ＭＯＤＥＳＴＯＲＮＯ．＊１０ＥＸＥＣ１－１０ＲＥＣＬＣＬＲAn asterisk ( ) appears at the left of the number when data has been saved in the preset memory.