Panasonic AV-HS300 Operating Instructions Manual

Panasonic AV-HS300 Operating Instructions Manual Manual pdf 26 page image

263. Setup3-1. Setting the input signals3-1-1. Setting the input signals (IN 1 to 5)If HD has been selected as the system format, SDI or analog HD component can be selected for each input.This selection is possible only when the analog HD input option has been connected. Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUPmenu. Turn [F1] to display the IN1 to 5 menu. Turn [F2], select the input signals using the SIG item, turn [F3], and select SDI or ANLG (analog HDcomponent) using the MODE item.ＩＮ１－５１／１４ＳＩＧＩＮ１ＭＯＤＥＳＤＩＩＮ２ＩＮ３ＩＮ４ＩＮ５ＡＮＬＧ3-1-2. Setting the input signal frame synchronizerThe frame synchronizer can be set to ON or OFF for each input. Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUPmenu. Turn [F1] to display the FS menu. Turn [F2], select the input signals using the SIG item, turn [F3], and select ON or OFF for the framesynchronizer using the FS item.ＦＳ３／１４ＳＩＧＩＮ１ＦＳＯＮＩＮ２ＩＮ３ＩＮ４ＩＮ５ＯＦＦAVDL function is active while the frame synchronizer function is set to OFF.The AVDL function automatically adjusts the input image signal phase to the horizontal synchronizationreference signal phase.For details, refer to “3-6. Adjusting the output signal phase”.