80 Using Play List: Overwrite Editing of Play ListsSelect tracks to overwrite. When V is selected, audio on thechannel other than that selected by video and EXTRA isoverwritten. When V and EXTRA TRACK are selected, allaudio and video tracks are overwritten.1 Press the MENU button and use the cursor buttonsto choose [SETTING] – [INPUT TRACK].2 Press the SET button, choose [VIDEO], [EXTRAAUDIO], and select desired tracks. Then press theSET button.◆ NOTE:• You can also use the INPUT SELECT AUDIO and VIDEO buttons toselect INPUT TRACKS.• Overwriting takes place only when VIDEO or EXTRA AUDIO isselected.• In overwriting, you can use the AUDIO CH menu to switch audiochannel location in overwriting.➝For details, refer to “Audio Channel Replacement DuringEditing” (page 69).Use the steps below to copy and paste audio registered to anevent to an EXTRA track.1 Move the cursor to the event you want to copy.2 Press the A.DUB button to record event audio on theEXTRA track.Use the IN and OUT buttons to select the location (R IN/ROUT) for inserting video from the play list and the location (PIN/P OUT) for inserting the source video. As soon as three INand OUT points are defined the remaining point isautomatically determined and completes registration. Whenboth IN points are defined, the end of the source clipautomatically becomes the OUT point.1 Open the play list screen.2 Play back video to locate the overwrite location.Use the operation buttons or search dial to play backvideo.3 Register an IN point.Use the PLAY or STILL button to find a location to insertaudio and video. Then hold down the IN button and pressthe ENTRY button.4 Register an OUT point.Use the operation buttons or search dial to locate the endof audio and video. Then hold down the OUT button andpress the ENTRY button.Setting Tracks for OverwritingWriting Event Audio to EXTRA TrackSelecting Write Location and Audio/Video to Import2,3,44 531Registering the Overwrite Location
