Setup: Item Settings 111SetupThis menu sets buttons available on the key panel in REMOTE mode, switches display of the CTL counter display between 12and 24-hour clock display, sets superimposed display, character displays in superimposed display, SETUP-MENU and otherdisplays, sets recording formats, sets the formats that can be added to the play list and sets the time of the internal clock.* An underlined setting indicates an initial value.BASICItem SettingSettings and brief function descriptionFRNo.SUPERDISP.FRNo.SUPERDISP.001 LOCAL ENA000000010002DISSTOPENARestricts the number of buttons on the key panel that are available when the CONTROLswitch is set to REMOTE.0: No buttons are available.1: Only the STOP button is available.2: All buttons are available.002 CTL DISP00000001±12h24hSwitches the CTL counter display between 12 and 24-hour clock display.0: 12-hour clock display1: 24-hour clock display003 REMAIN SEL0000000100020003OFF2L1LR/TTLSpecifies whether to display the remaining time or total time via the VIDEO MON connectorand via superimposed display of the LCD panel.0: No display.1: Displays remaining media time on the second line.2: Displays remaining media time on the first line.3: Displays the remaining media time on the first line and total media time on the secondline.NOTE:• These functions are not displayed when “2L” is selected and “TIME” is set in setupmenu No. 006 (DISPLAY SEL).• Total tape time is not displayed when “R/TTL” is selected and “TIME” is set in setupmenu No. 006 (DISPLAY SEL).006 DISPLAY SEL0000000100020003000400050006000700080009TIMET&STAT&S&MT&RTT&YMDT&MDYT&DMYT&UBT&CTLT&TSpecifies the output of the VIDEO MON connector or what is displayed in thesuperimposed display of the LCD panel.Here, “data” indicates the CTL/TC/UB value selected with the COUNTER button.0: Data only1: Data and operating status2: Data, operating status and mode3: Data and REC TIME4: Data and REC DATE (year/ month/day)5: Data and REC DATE (month/day/year)6: Data and REC DATE (day/month/year)7: Data and user bitHowever, when UB is selected with the COUNTER button, the time code is indicated afterthe user bit.8: Data and CTLHowever, when CTL is selected with the COUNTER button, the time code is indicated afterCTL data.9: Data and time codeNOTE:An error message appears in the superimposed display if a warning or error occurswhen T&S&M is selected.007 CHARA H-POS0000|0004|00160|4|16Specifies the horizontal character position output via the VIDEO MON connector ordisplayed in the superimposed display of the LCD panel.
