Chapter 10 - Waypoint and Route NavigationPage 10-20 961 Operations and Reference Manual Rev. DFigure 5: Restarting the desired trackWhenever you want to steer directly from an off-course posi-tion to a waypoint, press the RESTART HERE key, and the 961recalculates the desired track to extend from your presentposition directly to the next waypoint, resetting your XTE tozero. You can restart the desired track at the 3-D STEERscreen, the traditional STEER screen, the CHART screen, andthe TRIP screen.Restarting from thesteering screensAt the 3-D STEER screen or the traditional STEER screen,press the RESTART HERE key, then press the CONFIRM key.Your present position becomes your new “from” point; XTEbecomes zero and the 961 returns to the STEER screen.Restarting from thechart screenAt the CHART screen, first press the GO TO key. At the GO TOCOORDINATES dialog box, press the RESTART HERE key.Your present position becomes your new ‘from” point; XTEbecomes zero and the 961 returns to the CHART screen.Restarting from thetrip screenAt the TRIP screen, highlight the active trip waypoint. Pressthe GO TO SELECTION key, then press the YES, RESTARTHERE key, and the 961 inserts a point at your present positioninto the trip. Your present position becomes your new “from”point, XTE becomes zero, and the 961 returns to the STEERscreen.
