Chapter 6 - Creating Waypoints961 Operations and Reference Manual Rev. D Page 6-5The WAYPOINTS screen lists all your existing waypoints,showing symbol, name, distance from your present position,bearing, and lat/lon or TDs and GRI.To select a waypoint (indicated by the horizontal stripe), pressthe CURSOR PAD up or down.To the right of the LONGITUDE column is a red vertical slidebar, which is relative to the size of the list of waypoints. Thesmaller the slider, the larger the list; the larger the slider, thesmaller the list. The slider also indicates your position in thelist, i.e. at the top, in the middle, at the bottom, or anywhereelse in between.Other displays ofwaypointsIn addition to the WAYPOINTS and CHART screens, you alsocan display past, active, and future waypoints in today’s trip(on the TRIP screen), and you can display the active waypoint(the waypoint the 961 is navigating to) on the CHART screenINFO BARs and on both STEER screens. These screens areexplained in separate chapters, however. For details about dis-playing waypoints on the TRIP screen, see ”Displaying the trip”starting on page 11-3. For details about displaying waypointson the steering screens, see ”Steering to a waypoint” startingon page 10-2.Sorting the list of waypointsYou can sort the waypoint list by the following:• symbol• name• distance from your present position• bearingAt the WAYPOINTS screen, press the CURSOR PAD left orright to select the particular sort field (whenever you sort thewaypoints list, you retain the currently selected waypoint).
