231Security/Network/ACL StatusEach row describes the ACE that is defined. It is a conflict if aspecific ACE is not applied to the hardware due to hardwarelimitations. The maximum number of ACE is 256 on each switch.LOCATION：▼ Monitor▼ Security▼ Network￭ ACL StatusPARAMETERS：Items DescriptionUser Indicates the ACL user.IngressPortIndicates the ingress port of the ACE.Possible values are：All：The ACE will match all ingressport.Port：The ACE will match a specificingress port.Frame Type Indicates the frame type of the ACE. Possiblevalues areAny：The ACE will match any frame type.EType：The ACE will match Ethernet Typeframes. Note that an Ethernet Typebased ACE will not get matched by IPand ARP frames.ARP：The ACE will match ARP/RARP frames.IPv4：The ACE will match all IPv4 frames.IPv4/ICMP：The ACE will match IPv4 frameswith ICMP protocol.IPv4/UDP：The ACE will match IPv4 frames withUDP protocol.IPv4/TCP：The ACE will match IPv4 frames withTCP protocol.IPv4/Other：The ACE will match IPv4 frames,
