21The following table provides the description of each button:Table. Configuration buttonsFront PanelThe default page after you login successfully is port states’page. The port 1 to port 8 are gigabit fiber and port 9 and 10are gigabit open slot. When the port image is green, itmeans this port is connected. Auto-refresh mode is disableby default setting. It will update the current port state by 5seconds if you check it. Or you can click Refresh button toupdate the states manually. Click the each port image willopen detailed statstics of selected port.Figure 3-3.Menu TreeButton DescriptionSave Set specific value into the SwitchReset Restore the parameters to previoussaving valueShow the help information forselected pageLogout the management webinterface of the switch
