158FigureVCL/Protocol-based VLAN/Protocol to GroupThis function can assign a specific protocol frame into aVLAN group. When a frame is received in a port, its VLAMmembership can then be determined based on the protocoltype being used by the inbound packetsLOCATION：▼ Configuration▼ VCL▼ Protocol-based VLAN￭ Protocol to GroupPARAMETERS：Items DescriptionDelete To delete a Protocol to Group Name mapentry, check this box. The entry will bedeleted on the switch during the next SaveFrame Type Frame Type can have one of the followingvalues:1. Ethernet2. LLC3. SNAP4. Note: On changing the Frame type field,valid value of the following text field willvary depending on the new frame typeyou selectedValue Valid value that can be entered in the textfield depends on the option selected from the
