Lenovo motorola Moto G Service And Repair Manual

Also see for motorola Moto G: Service manual

Moto G (4th Generation)Level 2 – Service and Repair ManualMotorola Mobility Confidential Restricted:PAGE 70 Do not share without consent from Motorola13. Remove the SD Card Shim from the carrier.14. Place the SD Card Shim into the fixture, usingthe pins in the fixture to align it.15. Place the PCB into the fixture over the RearLoudspeaker Pad, Display Flex Kapton Tape,and SD Card Shim, using the pins in thefixture to align it.16. Press down on the PCB for 5 seconds tosecure the Rear Loudspeaker Pad, DisplayFlex Kapton Tape, and SD Card Shim to thePCB.17. Remove the PCB from the fixture.18. Remove the remaining liners from the RearLoudspeaker Pad and SD Card Shim.19. Wrap the Display Flex Kapton Tape aroundthe edge of the PCB and over the Shield,removing the remaining liner in the process.20. Press down on the Display Flex Kapton Tapefor 5 seconds to secure the Kapton Tape tothe PCB and Shield.