Moto G (4th Generation)Level 2 – Service and Repair ManualMotorola Mobility Confidential Restricted:PAGE 115 Do not share without consent from MotorolaDisplay Adhesive AssemblyDescription Reference #DIE CUT,ADHES,MN LENS,PSA 1.2ASSY,HSG,FRNT,WHTASSY,HSG,FRNT1.31. Use cotton swabs and ISP Alcohol to cleanthe Display bonding ledge, Top Frame, andBottom Frame. The Display bonding ledge ishighlighted in the photo.// CAUTION //Display bonding ledge, Top Frame, and BottomFrame cleaning is critical to the phone’s waterresistance. You must thoroughly clean thesurfaces with ISP Alcohol and allow it to drycompletely before applying 3M AP-111Adhesion Promoter.2. Wait for the ISP Alcohol to dry completely.// CAUTION //Do not use the same cotton swabs to cleanwith ISP Alcohol and apply 3M AP-111Adhesion Promoter. The Display will notproperly adhere to the Front Housing if thecotton swabs are reused. The cotton swabsmay be used for 2 applications but then mustbe discarded.3. Use cotton swabs to apply 3M AP-111Adhesion Promoter to the Display bondingledge.4. Wait for the 3M AP-111 Adhesion Promoter todry.