Lenovo motorola Moto G Service And Repair Manual

Also see for motorola Moto G: Service manual

Moto G (4th Generation)Level 2 – Service and Repair ManualMotorola Mobility Confidential Restricted:PAGE 29 Do not share without consent from MotorolaBattery Removal/// WARNING ///Failure to adhere to Safety Critical Note(s) mayincrease risk of rupture, burning, or failure to functionsafely when used by the customer. Refer to the BatterySafety Guidelines.// CAUTION //Handle the Battery Pack with care. If dropped to thefloor, it may be internally damaged and must bescrapped.Ensure Battery and its insulation are not damaged (e.g.scratched, dented, punctured) prior to and throughoutassembly.Prior to assembly, ensure Battery edges and surfacesare not dented or deformed, and that fixtures and partsthat will contact the Battery are free of foreign material.Ensure screws and screwdrivers do not contact theBattery.NOTEThe Battery can be recovered andreused after removal.1. Use the Plastic Tweezers to slowly peel theThermal Spreader from the PCB and Battery,starting in the lower left corner on the Battery.NOTEAfter you remove the ThermalSpreader, you cannot reuse it.2. Use the Plastic Tweezers to remove theKapton ® Tape from across the Battery Wire,starting at the Shield side.NOTEAfter you remove the Kapton Tape, youcannot reuse it.