Tool UpdateMethodsSupportedCoreSystemFirmwareUpdatesI/O DevicesFirmwareUpdatesGraphicaluserinterfaceCommandlineinterfaceSupportsUXSPsLenovo XClarityEssentials OneCLI(OneCLI)In-bandOut-of-bandOn-TargetOff-Target√ All I/Odevices√ √Lenovo XClarityEssentialsUpdateXpress(LXCE)In-bandOut-of-bandOn-TargetOff-Target√ All I/Odevices√ √Lenovo XClarityEssentials BootableMedia Creator(BoMC)In-bandOut-of-bandOff-Target√ All I/Odevices√(BoMCapplication)√(BoMCapplication)√Note: For BMC and UEFI firmware updates.• Lenovo XClarity Provisioning ManagerFrom Lenovo XClarity Provisioning Manager, you can update the Lenovo XClarity Controller firmware, theUEFI firmware, and the Lenovo XClarity Provisioning Manager software.Note: By default, the Lenovo XClarity Provisioning Manager Graphical User Interface is displayed whenyou start the server and press the key specified in the on-screen instructions. If you have changed thatdefault to be the text-based system setup, you can bring up the Graphical User Interface from the text-based system setup interface.For additional information about using Lenovo XClarity Provisioning Manager to update firmware, see:“Firmware Update” section in the LXPM documentation compatible with your server at https://sysmgt.lenovofiles.com/help/topic/lxpm_frontend/lxpm_product_page.html• Lenovo XClarity ControllerIf you need to install a specific update, you can use the Lenovo XClarity Controller interface for a specificserver.Notes:– To perform an in-band update through Windows or Linux, the operating system driver must be installedand the Ethernet-over-USB (sometimes called LAN over USB) interface must be enabled.For additional information about configuring Ethernet over USB, see:“Configuring Ethernet over USB” section in the XCC documentation version compatible with yourserver at https://sysmgt.lenovofiles.com/help/topic/lxcc_frontend/lxcc_overview.html– If you update firmware through the Lenovo XClarity Controller, make sure that you have downloadedand installed the latest device drivers for the operating system that is running on the server.For additional information about using Lenovo XClarity Controller to update firmware, see:Chapter 7. System configuration 191