b. Flex both sides of the retainer downward to release the microprocessor from the retainer 1 . Then, liftthe microprocessor off the retainer 2 .Notes:• Your microprocessor might look different from the one illustrated.• Touch only the edges of the microprocessor. Do not touch the gold contacts.Figure 196. Removing the microprocessor from the bracketc. Carefully wipe the thermal grease off the old microprocessor. Place the old microprocessor on astatic-protective surface.6. To install a new microprocessor, do the following:a. Remove the microprocessor socket cover if it is installed.Figure 197. Removing the microprocessor socket coverb. Touch the static-protective package that contains the new microprocessor to any unpainted surfaceon the outside of the computer. Then, remove the new microprocessor from the package.Chapter 9. Hardware removal and installation 209
