4. To remove a storage drive from the type 2 bracket, flex both sides of the bracket to remove the storagedrive from the bracket.Figure 66. Removing the storage drive from the type 2 bracket5. To install a new storage drive in the type 2 bracket, flex both sides of the bracket and align pins 1 onthe bracket with the corresponding holes in the drive.Notes:• Ensure that the circuit board 3 faces upward and the connectors 2 face toward the rear of thebracket.• Do not touch the circuit board 3 on the storage drive.Figure 67. Installing the storage drive into the type 2 bracket132 P720 Hardware Maintenance Manual
