6 G ett i ng c on ne c tedConnecting to the Internet502 Have the owner of the other device send the information to you. Your device willautomatically receive it.3 On the Receiving Data popup, tap Yes.Connecting to the InternetYour ET180 allows you to connect to your mobile ISP, and use the connection to sendand receive email messages and view Web or WAP pages.For more information on the various wireless data communication programs bundledwith your device, go to "7 Wireless data programs" on page 53.Connecting to a networkIf you have access to a network at work, you can send email messages, view Intranetpages, synchronise your device, and possibly access the Internet. You can connect to anetwork by creating a modem connection via a RAS account.Before you can create this modem connection, your network administrator will need toset up a RAS account for you. If this is the method you want to use, see "To create amodem connection to a network" later on this page. Your network administrator may alsogive you VPN settings.To create a modem connection to a network1 Get the following information from your network administrator:• Dial-up access telephone number• User name and password• Domain name• TCP/IP settings2 If your device does not have a built-in modem, install a modem card.3 Tap and then Settings. In the Connections tab, tap the Connections icon .4 Under the Internet settings, select Internet Settings and tap Modify.5 In the Modem tab, tap New.6 In the Make New Connection window, enter a name for the connection.7 In the Select a modem list, select your modem type.If your modem type does not appear, try re-inserting the modem card. If you areusing an external modem that is connected to your device with a cable, selectHayes Compatible on COM1.8 You need not change any settings in Advanced. Most ISPs now use a dynamicallyassigned address. If the ISP you are connecting to does not use a dynamically-assigned address, tap Advanced and then the TCP/IP tab, and enter the address.When finished, tap OK.
