a. Open the handles on both sides of the storage drive bracket. Disconnect the cables from the storagedrive, and pull out the bracket with the storage drive.Figure 69. Removing the type 1 storage drive bracketb. Flex both sides of the bracket to remove the 2.5-inch storage drive from the bracket.Note: If a 3.5-inch storage drive also is installed in the bracket, remove the 3.5-inch storage drivefirst. See “3.5-inch storage drive in the storage drive bay” on page 89.Figure 70. Removing the storage drive from the type 1 bracket4. To install a 2.5-inch storage drive in a type 1 bracket, do the following:a. Open the handles on both sides of the storage drive bracket, and pull out the empty bracket.94 P720 User Guide
