3. To remove the flex-bay bracket, do the following:a. Press the retaining clip 1 on the top of the flex-bay bracket.b. Pivot the bracket outward from the rear to remove it from the computer chassis.Figure 54. Removing the flex-bay bracket4. To install the flex-bay bracket, do the following:a. Position the flex-bay bracket into the chassis at a relative angle of about 45-degree as shown. Alignthe two posts on the top and the bottom of the flex-bay bracket with the notches in the computerchassis.Figure 55. Positioning the flex-bay bracket into the chassis86 P720 User Guide
