Lenovo 102912U Installation And User Manual

Contents

Installing the Ethernet cardAttention:Do not open your server or attempt any repair before reading and understanding the Safety Information and theWarranty and Support Information on the ThinkServer Documentation DVD that came with your product, and“Guidelines” on page 21. To obtain a copy of the publications, go to:http://www.lenovo.com/supportThis section provides instructions on how to install the Ethernet card and how to install the Ethernet carddriver on Windows operating systems. Use any documentation that came with the Ethernet card and followthose instructions in addition to the instructions in this section.To install the Ethernet card, do the following:1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect allpower cords from electrical outlets and disconnect all cables that are connected to the server.2. Remove the server cover. See “Removing the server cover” on page 23.3. Lay the server on its side for easier operation.4. Touch the static-protective package that contains the Ethernet card to any unpainted surface on theoutside of the server. Then, remove the Ethernet card from the package.5. The Ethernet card is a kind of PCI card. See “Installing a PCI card” on page 54 and follow thoseinstructions to install the Ethernet card.What to do next:• To work with another piece of hardware, go to the appropriate section.• To complete the installation, go to “Completing the parts replacement” on page 90.On Linux operating systems, you do not need to install any device driver for the Ethernet card; on Windowsoperating systems, you need to install the device driver for the Ethernet card. To install the device driveron Windows operating systems, do the following:1. Save any open documents and exit all applications.2. Insert the ThinkServer EasyStartup DVD that came with your server into the DVD drive.Note: You do not need to use the driver disc that came with the Ethernet card.3. Right-click My Computer and select Properties. The System Properties window opens.4. On the Hardware tab, click the Device Manager button. The Device Manager window opens.5. Expand the Network adapters and then right-click one of the Ethernet cards (PRO/1000PT or theyellow question mark).6. Select Update Driver.... The Hardware Update Wizard program opens.7. Select Install the software automatically (Recommended) and click Next to continue.8. Follow the instructions on the screen.Removing the Ethernet cardAttention:Do not open your server or attempt any repair before reading and understanding the Safety Information and theWarranty and Support Information on the ThinkServer Documentation DVD that came with your product, and“Guidelines” on page 21. To obtain a copy of the publications, go to:http://www.lenovo.com/supportThis section provides instructions on how to remove the Ethernet card. Use any documentation that camewith the Ethernet card and follow those instructions in addition to the instructions in this section.Chapter 5. Installing, removing, or replacing hardware 57