Keysight E1406A User Manual and SCPI Programing Guide 251VXI Subsystem Keysight E1406A Command ReferenceComments– The routing is set so the device selected by the VXI:SELect command cansource the trigger line and all other devices in the system may monitor thattrigger line.– Some mainframe extender devices do not support some trigger lines. Thiscommand will determine whether the specified trigger line is supportedwhile it attempts to execute the command and return a trigger notsupported error if it encounters any extenders that do not support thespecified trigger. It will attempt to direct all extenders that do support thespecified trigger, even if it encounters some extenders that do not.– This command can only be executed by the System instrument in acommand module that is serving as resource manager for the entireVXIbus system.– Related Commands: VXI:SELect, VXI:ROUTe:TTLTrg,VXI:ROUTe:INTerrupt, VXI:CONFigure:MEXTender?:ROUTe:INTerruptVXI:ROUTe:INTerrupt configures the routing of the interrupt line specified by for all mainframe extenders in the system.ParametersComments– The routing is set so the device selected by the VXI:SELect command canhandle the interrupt line and all other devices in the system may assertthat interrupt line.– Some mainframe extender devices do not support directing interrupt lines.This command will determine whether the specified interrupt line issupported while it attempts to execute the command and return a triggernot supported error if it encounters any extenders that do not support thespecified line. It will attempt to direct all extenders that do support thespecified line, even if it encounters some extenders that do not.– This command can only be executed by the System instrument in acommand module that is serving as resource manager for the entireVXIbus system.– Related Commands: VXI:SELect, VXI:ROUTe:TTLTrg,VXI:ROUTe:ECLTrg, VXI:CONFigure:MEXTenderParameterNameParameterTypeRange of Values DefaultUnits numeric 0 through 7 none
