Keysight E1406A User Manual and SCPI Programing Guide 203STATus Subsystem Keysight E1406A Command Reference:QUEStionable:NTRansitionSTATus:QUEStionable:NTRansition sets the negative transition mask.For each bit unmasked, a 1-to-0 transition of that bit in the associated ConditionRegister will set the same bit in the associated Event Register.ParametersThe non-decimal numeric forms are the #H, #Q, or #B formats specified byIEEE-488.2.Comments– Executable when initiated.– No coupled commands.– *RST Condition: No change.– Related Commands: STATus subsystem commands, *SRE, *STB?ExampleSet the Questionable Signal Register Negative Transition Mask.STAT:QUES:NTR 64 Set event bit when wait-for-arm state is entered.:QUEStionable:PTRansitionSTATus:QUEStionable:PTRansition sets the positive transition mask.For each bit unmasked, a 0-to-1 transition of that bit in the associated ConditionRegister will set the same bit in the associated Event Register.Comments– See STATus:QUEStionable:NTRansition for parameters andcomments.ExampleSet the Questionable Signal Register Positive Transition Mask.STAT:QUES:PTR 64 Set event bit when wait-for-arm state is entered.ParameterNameParameterType Range of ValuesDefaultUnits numeric ornon-decimalnumeric0 through +32767 none
