Keysight B2961A/B2962A User’s Guide, Edition 3 5-9Front Panel OperationsTo Use Functions other than MeasurementTo apply the settings and close the dialog box, press OK.To cancel the setting change, press the Cancel/Local key.To Set Remote Display Mode1. Press the More > Display function keys.2. Press Remote.3. To enable the screen display in remote mode, press ON. To disable it, press OFF.To cancel the setting change, press the Cancel/Local key.To Save/Recall All Setup InformationThis function saves/recalls all setup information of the B2900. For this function,five storage areas are available in the built-in non-volatile memory (NVRAM).To save the setup information, do the following steps.1. Press the Config > Save function keys.2. Press a function key #1, #2, #3, #4, or #5 corresponding to the storage area.To recall the setup information, do the following steps.1. Press the Config > Recall function keys.2. Press a function key #1, #2, #3, #4, or #5 corresponding to the storage areawhich stores the setup information to recall.To Enable/Disable Media Transfer Protocol for EasyFile AccessFor details on this function, see “File Access Function (Easy File Access)” on page6-31.1. Press the More > I/O > USB function keys. The USB Status dialog box opens.2. Set the Easy File Access field to ON (enable) or OFF (disable).3. To apply the settings and close the dialog box, press OK.To cancel the setting change, press the Cancel/Local key.
