Setting Oven ControlsFEATURE OVERVIEWPreheat (Gas Range)Setting PreheatThe PREHEAT (_ pad controls the Preheat feature. The Preheat feature will bring the oven up to temperature andthen indicate when to place the food in the oven. Use this feature in combination with the Bake pad when recipes callfor preheating. Preheating is not necessary when roasting or cooking casseroles. The oven can be programmed topreheat at any temperature between 170°F to 550°F.INSTRUCTIONS PRESS DISPLAYTo set the Preheat temperature for 350°F:1. Arrange the interior oven racks.2. Press (_. "- - - °" and "BAKE" will appear in the display H,_(Fig. 1).3. Press _ (_ @. "350°" and "PRE" will appear in the _(_@display (Fig. 2).4. Press (_. "PRE" and "BAKE" will appear in the display asthe oven heats and reaches 350°F (Fig 3).Note: After the oven has reached the desired temperature (thisexample, 350°F) the control wilt beep and the "PRE" light will turnoff and oven temperature will be displayed (Fig. 4). If the beep wasmissed, a quick glance at the display with oven temperatureshowing in the oven display is a good way to check that the ovenhas already reached the preheat temperature. Once the oven haspreheated, PLACE FOOD IN THE OVEN. The "BAKE" light wiltstay on.Press _ when baking is complete or to cancel the preheatfeature.®To change Preheat temperature while oven ispreheating (example changing from 350 to 425°F):If it is necessary to change the preheat temperature while the ovenis preheating to the original temperature:1. While preheating, press (_. "- - -°" and "BAKE" will appearin the display (Fig. 5)2. Enter the new preheat temperature.Press _ _ (_)."425 °" and "BAKE" will appear in the display (Fig. 6).3. Press (_. "PRE" and "BAKE" will appear in the display asthe oven heats to 425°F (Fig 7). A beep will sound once theoven temperature reaches 425°F and the display will show"425 °" and "BAKE" (Fig. 8).4. When baking is complete press ____.®®®®®Figure 1Figure 2Figure 3Figure 4Figure 5Figure 6Figure 7Figure 815