Kaco blueplanet 15.0 TL3 Operating Instructions Manual

Also see for blueplanet 15.0 TL3: Manual Manual Manual Operating instruction Quick guide

Kaco blueplanet 15.0 TL3 Operating Instructions Manual Manual pdf 45 page image

ENConfiguration and OperationKACO Operating Instructions blueplanet 15.0-20.0 TL3 Page 45Filtering display data (daily view only)1. Open the web server.2. Select daily view.3. To show or hide measurements, select or deselect the corresponding checkboxes in the “Choose view” area.Exporting data1. Filter the display data if necessary.2. Select the display period if applicable (daily, monthly, yearly or overview).3. Press the “Export data” button.4. Save the file.NOTERegardless of the display data selected in the “Choose view” area, an export file always contains allmeasurement data and yield data available for the selected period8.5 Performing the software updateYou can update the software of the inverter to a new version using the integrated USB interface. Use a FAT32-format-ted USB stick to do this. Do not use any storage media with an external power supply (for example: an external harddisk).NOTEEnsure that the AC and DC inverter power supply is active. It is only possible to update all of theinverter’s components to the most current software version in this operating state.CAUTIONDamage to the inverterThe update can fail if the power supply is interrupted during the update process. Parts of thesoftware or of the inverter itself can then be damaged.» Never disconnect the DC and AC power supply during a software update.» Do not remove the USB stick during a software update.Preparing for the software update1. Download the software update file from the KACO web site and store it on your hard disk.2. Copy the update file (.KUF) onto the USB stick.» Perform software update.NOTEThe update can take several minutes. The “Operating” LED flashes during the update process. Theinverter may restart several times.The following message appears if the DC power supply is too low: “DC power supply too low! Performupdate anyway?”In this case, select "No" and perform the update with a stable voltage supply.