ENENConfiguration and OperationPage 32 KACO Operating Instructions blueplanet 15.0-20.0 TL38.3.2 Menu structureNOTEThe menu items displayed on screen are dependent on the country and network settings, and mayvary according to the type of device. Here, configuration can also be carried out using only the ACpower supply.Icons used:41 2 3 Menu level (0, 1, 2, 3) Submenu availableDisplay menu EN Country-specific settingOption menu FR-HTA Country and grid type-specific settingPassword protected menu (password can be requested from KACO Service)Country-spec.SettingMenulevelDisplay/setting Action in this menu/meaningAll countriesDesktop Desktop " Press the right arrow button.41 2 3 4 "Measurements"menu" Open the menu: Press the right arrow button orthe Enter button.41 2 31 Generator Displays the DC-side voltage, amperage and power.41 2 31 Grid Displays the AC-side voltage, amperage and power41 2 31 Power control Displays the current value of the external power limita-tion by the grid operator.41 2 31 cos-phi Indicates the status of the reactive power control.41 2 31 Unit temperature Displays the temperature in the inverter housing.41 2 31 Yield counter Displays the yield in kWh." Reset the counter using the “Reset” key.41 2 31 Yield today Displays the cumulative yield for the current day.41 2 31 Total yield Displays the total yield up to now.41 2 31 CO2 savings Displays the calculated CO2 savings (in kg).41 2 31 Oper. hrs cntr Displays the duration of operation in hours." Reset the counter using the “Reset” key.41 2 31 Oper. time today Displays the duration of operation on today's date.41 2 31 Total oper. time Displays the total operating time.41 2 31 Log data view" Open the menu: Press the right arrow button orthe Enter button." Measurement data can be transferred to a USBstick by selecting it and moving it.