KLN Series 022014 B-5B.20 SOURce:CURRent:PROTection:TRIPped? QUERY SOUR:CURR:PROT:TRIP?Syntax: Short Form: SOUR:CURR:PROT:TRIP? Long Form: SOURce:CURRent:PROtection:TRIPped?Description: Returns a 1 if the protection circuit is tripped and a 0 if it not tripped.Return Format: Example: SOURce:CURRent:PROTection:TRIPped? Returns 0 if OCP was not executed, 1 if OCP was exe-cuted.B.21 SOURce:LIST:DTIMe COMMAND SOUR:LIST:DTIMSyntax: Short Form: SOUR:LIST:DTIM Long Form: SOURce:LIST:DTIMe Description: Sets the output ramp-down time.Argument: is a value in the range from 0.0 to 9.9 seconds.Example: SOURce:LIST:DTIMe 3.0 programs the output ramp-down time to 3.0 seconds.B.22 SOURce:LIST:DTIMe? QUERY SOUR:LIST:DTIM?Syntax: Short Form: SOUR:LIST:DTIM? Long Form: SOURce:LIST:DTIMe?Description: Indicates (in seconds) how long output voltage takes to reach zero from programmedvalue.Return Format: Example: SOURce:LIST:DTIMe? returns 3.00000E+00 to indicate ramp-down time is 3.0 seconds.B.23 SOURce:LIST:RTIMe COMMAND SOUR:LIST:RTIMSyntax: Short Form: SOUR:LIST:RTIM Long Form: SOURce:LIST:RTIMe Description: Sets the output ramp-up time.Argument: is a value in the range from 0.0 to 9.9 seconds.Example: SOURce:LIST:RTIMe 3.0 programs the output ramp-up time to 3.0 seconds.B.24 SOURce:LIST:RTIMe? QUERY SOUR:LIST:RTIM?Syntax: Short Form: SOUR:LIST:RTIM? Long Form: SOURce:LIST:RTIMe?Description: Indicates (in seconds) how long output voltage takes to reach programmed value.Return Format: Example: SOURce:LIST:RTIMe? returns 3.00000E+00 to indicate ramp-up time is 3.0 seconds.B.25 SOURce:MEMory:CLS COMMAND SOUR:MEM:CLSSyntax: Short Form: SOUR:MEM:CLS Long Form: SOURce:MEMory:CLSDescription: Clears all memory locations used for storing and recalling power supply settings.Argument: NoneExample: SOURce:MEMory:CLS clears all memory locations.B.26 SOURce:MEMory:CURRent:X COMMAND SOUR:MEM:CURR:XSyntax: Short Form: SOUR:MEM:CURR:X Long Form: SOURce:MEMory:CURRent:X Description: Sets the memory location defined by X to the current value .Argument: is a value in the range from 0 to rated current of unit.Example: SOURce:MEMory:CURRent:5 11.6 sets memory location 5 to 11.6A.
