JVC LST0728-001B Instructions Manual

Contents

53Selecting the Recording Control ModeIn order to record in the recording control mode, you need tospecify the scheduler settings (A Page 53), image recordingsettings (A Page 55), and picture quality settings(A Page 58) in the main menu [Camera Record Setting].1 Press and hold down the [REC CONTROL]button while camera recording is stopped([REC] indicator is off).● The [REC CONTROL] indicator lights up and the unitswitches to the recording control mode.● Recording will be executed according to the camerarecord settings.Memo :● To stop recording, press and hold down the [REC/STOP] buttonduring recording in a mode other than recording control (the[REC] indicator lights up or appears blinking). After the light ofthe [REC] indicator goes off, press and hold the [RECCONTROL] button.● To exit the recording control mode, press and hold down the[REC CONTROL] or [REC/STOP] button.● Depending on camera status or other circumstances, it may takea while before recording starts after switching to the recordingcontrol mode.Note :● Do not turn off the power while you are configuring the camerarecording settings.Selecting the Manual Recording Mode1 Press the [REC/STOP] button● The unit switches to the manual recording mode andstarts recording from all cameras.● The [REC] indicator lights up.Memo :● To exit the manual recording mode, press and hold down the[REC/STOP] button. Upon doing so, the light of the [REC]indicator goes off.● To clear all recording modes, press and hold down the [REC/STOP] button.Scheduler SettingThis feature lets you specify when to switch each camera to theonline mode, as well as the online/offline mode of cameras when anevent occurs.Memo :● When in the online mode, the camera executes recordingaccording to the camera record settings.● When in the offline mode, recording is not executed regardlessof the camera record settings.● You can specify the time zone during which e-mail alerts aretriggered when motion is detected. You can also specify the timezone to activate automatic patrolling (A Page 93) when usingPTZ cameras.● The minimum unit of time that you can specify is 5 minutes.Note :● The online/offline mode has no impact on the manual recording,[EXT REC IN] signal recording, and emergency recordingmodes.● Even when AofflineB or AEventB is specified in the scheduler, thecamera switches to the AOnlineB mode if [Start cameras onremote live requests](A Page 106) is specified in [GeneralSettings] and live images are displayed on the [NVR Viewer].● During the interval that is set to AOfflineB, recording will not beperformed even when in the AOnlineB mode. During the intervalthat is set to AEventB, recording is performed according to therecording settings when the unit switches to the AOnlineB mode.1 Select [Camera Record Setting] from the mainmenu2 Click the [Scheduler...] button● The [Scheduler...] screen appears.3 Select the camera for which you want to set aschedule from [Camera].OPERATEREC CONTROLLIVE/BROWSESELECTPTZ/PRESETSERIAL㧝㧞㧟㧠㧡㧢*1/' 㧣㧥㧤 CANCEL ZOOM OUT ZOOM IN ENTERWARNINGALARMHDDLOCKSEARCHFUNCTION ALARM CLEARKEY REC/STOP STOP(PB) PLAYSKIPREV FWD[REC] Indicator[REC CONTROL] Button/Indicator [REC/STOP] Button[Camera Recording Administator] Screen[Scheduler...]Button[Scheduler] ScreenSelect a Camera