JVC LST0728-001B Instructions Manual

Contents

37Memo :● When you have selected a camera, the blue bar at the top ofeach live image changes to a lighter blue tone. This bar comeswith a tri-color square indicator, which indicates the followingfeatures, as well as characters that indicate the operating statusof the camera.A Event indicator (Left: yellow)Lights up when events specified in the [Camera RecordSetting] occur. The indicator appears black if eventindication has not been specified for the camera inquestion, or if no specified event has occurred.B Motion indicator (Center: red)Lights up when motion is detected.C Online indicator (Right indicator: Green)Blinks every time an image is received from the camera.D Operating status of the camera (Characters to the leftof the indicator)● The image bar displays the name of the camera as well as thename of the device to which the camera is connected.● To enlarge the camera image, double-click the blue bar at thetop. To return to the original size, double-click the blue bar again.● You can turn off the light of the indicator by clicking the event ormotion indicator that is lit.Viewing Images Using the PTZ FeaturesPTZ stands for pan, tilt and zoom.The PTZ features are only available if the camera supports the PTZfunctions. If the camera is not a PTZ camera, pressing the buttonwill have no effect.1 Click the PTZ navigation button in the [PTZControl] section● The camera moves in the direction indicated by the arrow.● Click the round button at the center to return to the homeposition.● Click the [+] and [-] buttons to zoom in and outrespectively.Note :● The PTZ features are only available if the camera supports thePTZ functions. If the camera is not a PTZ camera, pressing thebutton will have no effect.Memo :● If you see a set of crosshairs when placing your mouse pointerover the image from a PTZ camera, then you are able to controlthe orientation of the camera using point-and-click control on theimage screen. Control of the camera on the image screen is notpossible if the mouse pointer does not change to the crossshape pointer. The mouse pointer may not change to the cross-shape pointer depending on the type of the PTZ camera. Controlof the PTZ camera may not be possible for some PTZ cameraseven though the mouse pointer changes to the cross-shapepointer. In this case, use the PTZ navigation button of the [PTZControl] section to control the PTZ camera.● The mouse pointer does not change to the cross shape pointerfor analog cameras that are connected to the network encoder(IP video server) (e.g. VN-E4).● If your mouse is equipped with a scroll wheel, you can use it tocontrol the zoom in and out function on the PTZ camera.● When using electronic zoom feature on VN-C625U/VN-C655U,zooming will stop at the boundary between optical zoom andelectronic zoom. To continue zooming, perform zoom operationagain.Display StatusLive (Green) When live images are displayed withoutbeing recordedREC (Red) When recording is in progressStop (Yellow) When images are not acquired from thecamera, or when the camera is in theoffline mode (A Page 53)PTZ Navigation Button[Live] ScreenHome Button