JVC GR-D375US Instructions Manual

Also see for GR-D375U: Instructions

Contents

EN 35MENUS FOR DETAILED ADJUSTMENTADVANCED FEATURES[ ] = Factory-presetSOUND MODE and NARRATIONDuring tape playback, the camcorder detects thesound mode in which the recording was made,and plays the sound back. Select the type ofsound to accompany your playback picture.According to the menu access explanation onpage 31, select “SOUND MODE” or“NARRATION” from the Menu Screen and set itto the desired parameter.The setting below are effective only for videoplayback except “BRIGHT” and “REC MODE”.The parameters (except “OFF” in ON SCREEN,SOUND MODE and NARRATION settings) arethe same as in the description on page 32, 34.Allows you to set the video recording mode (SPor LP) depending on your preference. It isrecommended you use “REC MODE” in VIDEOMenu when using this camcorder as a recorderduring dubbing. ( pg. 42, 43)*SP indicator does not appear on the screen.[STEREO ]: Sound is output on both “L” and“R” channels in stereo.SOUND L : Sound from the “L” channel isoutput.SOUND R : Sound from the “R” channel isoutput.[OFF]: Original sound is output on both “L” and“R” channels in stereo.ON: Dubbed sound is output on both “L” and “R”channels in stereo. ( pg. 45)MIX: Original and dubbed sounds are combinedand output in stereo on both “L” and “R”channels. pg. 17, “Brightness Adjustment Of TheDisplay”[OFF]: The DATE/TIME does not appear.ON: The DATE/TIME is always displayed.When set to “OFF”, the camcorder’s displaydisappears. pg. 20, “Time Code”Playback MenusREC MODE [SP]* / LPSOUND MODENARRATIONBRIGHTDATE/TIMEON SCREEN OFF / [LCD] / LCD/TVTIME CODE [OFF] / ON