MENUS FOR DETAILED ADJUSTMENT32 ENFUNCTIONThe following menu settings can be changedonly when the Power Switch is set to “REC”.[ ] = Factory-preset( pg. 40), “Wipe or Fader Effects”( pg. 41), “Program AE, Effects and ShutterEffects”( pg. 41), “Program AE, Effects and ShutterEffects”( pg. 41), “Program AE, Effects and ShutterEffects”( pg. 38), “Exposure Control”( pg. 39), “White Balance Adjustment”[OFF]: Disables the function.ON: When the distance to the subject is lessthan 1 m (3.3 ft), set “TELE MACRO” to “ON”.You can shoot a subject as large as possible at adistance of approx. 40 cm (1.4 ft).Depending on the zoom position, the lens may goout of focus.SETTINGThe following settings are effective when thePower Switch is set to “REC”.[ ] = Factory-preset[SP]*: To record in the SP (Standard Play) modeLP: Long Play—more economical, providing 1.5times the recording time.* SP indicator does not appear on the screen.NOTES:● Audio Dubbing ( pg. 45) and Insert Editing( pg. 45) are possible on tapes recorded in theSP mode.● If the recording mode is switched, the playbackpicture will be blurred at the switching point.● It is recommended that tapes recorded in the LPmode on this camcorder be played back on thiscamcorder.● During playback of a tape recorded on anothercamcorder, blocks of noise may appear or theremay be momentary pauses in the sound.[12BIT]: Enables video recording of stereosound on four separate channels, and isrecommended for use when performing AudioDubbing. (Equivalent to the 32 kHz mode ofprevious models)16BIT: Enables video recording of stereo soundon two separate channels. (Equivalent to the48 kHz mode of previous models)OFF: Disables the function.[ON ]: To compensate for unstable imagescaused by camera-shake, particularly at highmagnification.NOTES:● Accurate stabilization may not be possible if handshake is excessive, or depending on the shootingcondition.● The “ ” indicator blinks or goes out if theStabilizer cannot be used.● Switch off this mode when recording with thecamcorder on a tripod.* Available only when the VIDEO/MEMORY Switchis set to “VIDEO”.Recording MenusWIPE/FADEREFFECTPROGRAM AESHUTTEREXPOSUREW. BALANCETELE MACROREC MODESOUND MODEDIS*