JVC GR-D375US Instructions Manual

Also see for GR-D375U: Instructions

Contents

EN 23VIDEO PLAYBACKVIDEO RECORDING & PLAYBACK1Yellow to VIDEO IN (Connect when your TV/VCR has only A/V input connectors.)2Red to AUDIO R IN*3White to AUDIO L IN** Not required for watching still images only.1 Make sure all units are turned off.2 Connect the camcorder to a TV or VCR asshown in the illustration.If using a VCR, go to step 3.If not, go to step 4.3 Connect the VCR output to the TV input,referring to your VCR’s instruction manual.4 Turn on the camcorder, the VCR and the TV.5 Set the VCR to its AUX input mode, and setthe TV to its VIDEO mode.6 Start playback on the camcorder. ( pg. 21)To choose whether or not the followingdisplays appear on the connected TV● Date/TimeSet “DATE/TIME” to “ON” or “OFF”.( pg. 31, 35)Or, press DISPLAY on the remote control to turnon/off the date indication.● Time CodeSet “TIME CODE” to “ON” or “OFF”.( pg. 31, 35)● Indications other than date/time and time codeSet “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.( pg. 31, 35)NOTES:● It is recommended to use the AC Adapter asthe power supply instead of the battery pack.( pg. 15)● To monitor the picture and sound from thecamcorder without inserting a tape or memorycard, set the camcorder’s Power Switch to “REC”,then set your TV to the appropriate input mode.● Make sure you adjust the TV sound volume to itsminimum level to avoid a sudden burst of soundwhen the camcorder is turned on.Connections To A TV Or VCRTVVCRTo AVconnectorAudio/Video cable(provided)