GETTING STARTED12 EN1 AC Adapter AP-V14U or AP-V18U2 Battery Pack BN-VF707U3 Audio/Video Cable (ø3.5 mini-plug to RCAplug)4 USB Cable5 Core Filter (for USB cable, pg. 13 forattachment)6 CD-ROM7 Remote Control Unit RM-V720U8 Lithium Battery CR2025* (for remote controlunit)9 Shoulder Strap (see the right column forattachment)! Lens Cap (see the right column forattachment)* A lithium battery is pre-installed in the RemoteControl Unit at time of shipment (with insulationsheet). To use the Remote Control Unit, removethe insulation sheet.NOTES:● In order to maintain optimum performance of thecamcorder, provided cables may be equipped withone or more core filter. If a cable has only one corefilter, the end that is closest to the filter should beconnected to the camcorder.● Make sure to use the provided cables forconnections. Do not use any other cables.How To Attach The Lens CapTo protect the lens, attachthe provided lens cap to thecamcorder as shown in theillustration.NOTE:To confirm the lens cap is oncorrectly make sure the cap isflush to the camcorder.How To Attach The Shoulder StrapFollow the illustration.1 Thread the strap through the eyelet.2 Fold it back and thread it through the strapguide and the buckle.● To adjust the length of the strap, loosen and thentighten the strap in the buckle.3 Slide the strap guide fully towards the eyelet.Provided AccessoriesORPlace here duringshooting.3221Strap guideBuckleEyelet