1-1S E C T I O N 1General Description• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •About the VISTA-128BPT/VISTA-250BPTAll references to the VISTA-128BPT also pertain to the VISTA-128BPTSIA. The differences between the two panelsare outlined in the SIA CP-01 Quick Reference Chart located at the beginning of this manual.The VISTA-128BPT/VISTA-250BPT is an 8-partition, UL Listed control panel with the following features:• Supports hardwired, polling loop, and wireless zones• Supervision of bells, keypads, RF receivers, and output devices• Scheduling capabilities (allows certain operations to be automated)The VISTA-128BPT/VISTA-250BPT can interface with the following devices:.• Up to six 6280 Graphic/Touch-Screen keypads• AlarmNet Total Connect (Remote Interactive Service) allows access from a wireless smart phone or web browser viaany Total Connect 2 compatible AlarmNet device.• Voice Keypad (6160V)UL Voice Keypad 6160V cannot be used for SIA Installations.• An ECP Communication Device that can send Contact ID messages• An access control system by using the ADEMCO VistaKey module (via the polling loop)UL The access control function is not Listed for use with the VISTA-128BPT/VISTA-250BPT Control Panel in a ULinstallation.NOTE: All references in this manual for number of zones, number of user codes, number of access cards,and the event log capacity, use the VISTA-250BPT’s features. The following table lists the differencesbetween the VISTA-128BPT and the VISTA-250BPT control panels. All other features are identical.Feature VISTA-128BPT VISTA-250BPTNumber of Zones 128 250Number of User Codes 150 250Number of Access Cards 250 500Event Log Capacity 512 1000VistaKey Modules 8 15
