Important Notes (Cont’d)45• If the panel has exit tones enabled and you arm the system in the Away mode, the keypad beepscontinuously throughout the exit period.Use the console emulation mode for the following functions:- Programming more than 10 system users.- Programming the Pager report option for users of residential control panels (e.g., VISTA-15P andVISTA-20P).- Special Function Key operations (such as macros or single-button paging).- End-User Scheduling.- To check for an “Alarm Cancelled” message (on commercial panels only) if this feature has beenenabled in the system.Wireless RangeThis device complies with the Z-Wave® standard of open-air, line of sight transmission distances of 100feet. Actual performance in a home depends on the number of walls between the controller and thedestination device, the type of construction and the number of Z-Wave enabled devices installed in thecontrol network.Please Note: Z-Wave home control networks are designed to work properly alongside wireless securitysensors, Wi-Fi, Bluetooth and other wireless devices. Some 900 MHz wireless devices such as baby cams,wireless video devices and older cordless phones may cause interference and limit Z-Wave functionality.Things to consider regarding RF range:- Each wall or obstacle (such as refrigerator, big screen TV, etc.) between the remote and the destinationdevice will reduce the maximum range of 100 feet by approximately 25-30%.- Brick, tile or concrete walls block more of the RF signal than walls made of wooden studs and drywall.- Wall mounted Z-Wave devices installed in metal junction boxes will suffer a significant loss of range(approximately 20%) since the metal box blocks a large part of the RF signal.WARNING: NOT FOR USE WITH MEDICAL OR LIFE SUPPORT EQUIPMENT!Z -Wave enabled devices should never be used to supply power to, or control the On/Off status or medicaland /or life support equipment.Controlling Devices:The features and functions that can be controlled vary by manufacturer and you will need to review the usermanual that was provided to determine capabilities of each device.IMPORTANT: Honeywell is not responsible for property damages due to improper setting of the thermostatmodes.