Honeywell Tuxedo Touch WIFI Installation And Setup Manual

Also see for Tuxedo Touch Wi-Fi: User guide Quick installation guide

Honeywell Tuxedo Touch WIFI Installation And Setup Manual Manual pdf 42 page image

Automation (cont’d)42Controlling Automation (Z-Wave) Devices RemotelyUse Total Connect to control Z-Wave devices: lamp modules (binary switch), dimmer modules (multilevelswitch), thermostats, etc., from a smart phone, i-PadTM, Android TM Tablet, Blackberry® or PC.1. Access the Total Connect account and navigate to the Automation section of the dashboard.2. Select a displayed device and click the desired action. Refer to the Total Connect online help guide forfurther details on controlling Z-Wave devices .Creating Scenes in Total ConnectUse the Automation section of the dashboard in Total Connect to create up to 20 scenes. Refer to theTotal Connect Online Help Guide for further details and device limitations for creating an automationscene.1. Access the Total Connect account and navigate to the Automation module. Click Create New. Entera name for the scene, select an icon, and then click on the check boxes for the various device actionsdesired for that scene. Set the thermostat, if used, to the desired mode and/or temperature for thatscene. Click Save when done.NOTE: Scenes created in Total Connect can be edited only from Total Connect.2. After scenes have been created, follow the Total Connect prompts to synchronize the data withTuxedo. Syncing is required before scenes created in Total Connect will display in Tuxedo.Viewing and Controlling Total Connect Scenes from TuxedoUse the Scenes icon to display and control scenes that have been created in Total Connect.1. From the “Home” screen, press the Automation and Scene Setup icons, then press the Remotebutton. The screen displays a list of scenes created in Total Connect.NOTE: The Local button allows you to view a list of scenes created in Tuxedo.2. To control a Remote scene, select the desired scene, then click the appropriate action (ex. Run).Enabling Devices for Total ConnectAfter scenes have been created, follow the Total Connect prompts to synchronize the data with Tuxedo.Syncing is required before scenes created in Total Connect will display in Tuxedo.1. From the “Home” screen, press Automation > Z-Wave Setup; the “Z-Wave Device Management” screen isdisplayed.2. Press the TC Enable icon; the “Z-Wave Device Management For Total Connect” screen is displayed.3. Select the device that you want to enable/disable in Total Connect.NOTE: Devices are defaulted to Enable.4. Press the Save icon when done.5. After devices have been enabled for Total Connect, follow the Total Connect prompts to synchronizethe data with Tuxedo. Syncing is required before the enabled devices will display in Total Connect.NOTES:1. Device IDs for Z-Wave devices could be different on Tuxedo and Total Connect web pages.2. On Total Connect, the maximum number of supported devices is 40 switches, 3 thermostats, and4door locks.Total Connect Server Screen for TroubleshootingThe “TC Server Info” screen displays the current server information and Z-Wave device status. Thisinformation is typically used for IP connection troubleshooting purposes in collaboration with a servicetechnician.To access Total Connect Server Information and Z-Wave Status from the Tuxedo keypad, do thefollowing: