Honeywell Lynx Touch 5100 Frequently Asked Questions Manual

Also see for LYNX Touch 5100: Programming guide

Contents

Honeywell Lynx Touch 5100 Frequently Asked Questions Manual Manual pdf 9 page image

Return to Table of Contents - 9 - Updated: 11/22/13FAQ’sDoes L5100 support Network Wide Inclusion (NWI)• Yes, This feature was added in the L5100 rev 6 panels.What if I install more than 40 light switches on a L5100?• You can add more than 40, you can’t control more than 40.I need more scenes, how can I get them?• Total Connect 2.0 allows you to create 20 more scenes.• When enabled through TOTAL CONNECT 2.0, they will be assigned to Scene numbers 21-40.• They can only be viewed via TOTAL CONNECT 2.0Why can I not edit my scenes locally?• TOTAL CONNECT 2.0 pushes scenes 21 to 40 to the panel. Scenes created through TOTAL CONNECT 2.0cannot be edited locallyWhat if I default my panel, do I lose my Z-Wave devices?• Yes, this will require you to exclude all your devices then exclude them before you can include them.I added a user code to my panel and now the codes programmed locallywith in my lock no longer operate it?• If you manually enter a user code at the door lock keypad, the door lock will inform the panel of this change.• As a result, L5100 will erase all user codes residing at the door lock, followed by a user code synchronizingsession.• This behavior is necessary and required if you want user code synchronization to work correctly.• For example, you can create a new user code from L5100 and the panel will propagate to all parties involved(TC and/or lock).TC <==> L5100 ----> Lock| |Bidirectional |one way

/ 11

Related manuals for Honeywell LYNX Touch 5100